又大又粗又硬又爽黄毛少妇_成 人 网 站 免费观看_少妇被粗大的猛烈进出VA视频_两个人WWW高清免费视频

The box material of the salt spray tester is corrosion-resistant high-quality polypropylene plastic plate. The whole mold is welded by high temperature. Corrosion resistant, easy to clean, no leakage. The box cover is the same transparent polypropylene plastic plate, which can clearly see the test items and spray in the box. The tower spray system is equipped with a salt liquid filtration system, without crystallization nozzles. The salt spray is evenly distributed and the settlement can be adjusted freely.
Manufacturer of salt spray test chamber
The edge of the salt spray tester is thickened, and the inner and outer layers are double-layer to prevent long-term high-temperature deformation. The thickness is 15 mm, and the sample placing table is made of 8 mm high temperature resistant ABS plate, with strong bearing capacity. The sample rack adopts plane indexing type, and the angle can be adjusted at will. The fog fell evenly all around. The fog is completely consistent. The test results are accurate and the number of test samples placed is large. (customized according to customer product requirements)
The salt spray tester is made of special glass nozzle, which can adjust the spray amount and spray angle. The spraying amount can be adjusted from 1 ml / h to 2 ml / h (the standard of ML /80 cm2 / h requires 16 hours of testing to determine the average level. The measuring cylinder is installed in a straight line, with beautiful and tidy appearance and convenient observation, which reduces the installation space of the instrument. The salt spray test chamber adopts the direct heating method, with fast heating speed and short standby time. When the temperature reaches, the constant temperature state will be automatically switched, with accurate temperature and low power consumption. The pure titanium heating tube is acid and alkali resistant and has a long service life.
The salt spray testing machine adopts automatic and manual water adding system to automatically or manually supplement the water level of the pressure bucket and the laboratory, so as to prevent the instrument from being damaged by water shortage and ultra-high temperature. When the water level of the salt spray test chamber is low, the power supply will be cut off automatically, and the safety warning light device will be lit and displayed. In case of overheating, the power supply of the heater will also be cut off automatically, and the safety warning light device will light up and display. When the water level of reagent (brine) is low, the safety warning light device will light up and display and send out an alarm. The leakage protection function of the salt spray test chamber can prevent personal injury and instrument failure caused by line leakage or short circuit.